The Killer RC – Gimbal Saver for the DJI Phantom 2 Vision + prevents gimbal separation and ribbon cable damage during a crash or hard landing. The Gimbal Saver pays for itself quickly. Replacing a damaged ribbon cable can cost $80+, plus having to wait days or weeks for the new ribbon cable to arrive. Installation of the Gimbal Saver is easy; simply remove the 3 screws on the back of the gimbal, and replace the factory plate with the Gimbal Saver plate. Tools needed: #0 phillips screw driver and a 5/64″ allen wrench. You may also want to add some Blue Loctite on the 3 factory screws. The Gimbal Saver is made from strong but lightweight billet 6061 aluminum. The Gimbal Saver only adds 3 grams of weight to your gimbal, including screws. The Gimbal Saver does not adversely affect the gimbal at all. The Gimbal Saver has a Nylon Protective Pad that prevents your gimbal from getting scratched. The Gimbal Saver does not interfere with the fit of the factory clear plastic gimbal lock. No custom modification is necessary at all. Manufactured in Ohio, USA.
This part is for the Phantom 2 Vision +. If you have a Phantom 3 click here.