This Killer Kontroller v3 Light Controller allows you to control multiple sets of LED headlights and tail lights on your RC car. The Killer Kontroller v3 goes in between your radio receiver and your servos. Use your 3rd channel to switch through 11 different light modes.
- All lights off
- All lights off + turn/brake
- Low beam + turn/brake
- High beam + turn/brake
- Headlight Channel A on + turn/brake
- Headlight Channel B on + turn/brake
- Fast strobe
- Quad strobe
- Alternating Quad strobe
- Accelerating strobe
- Headlights On, rear slow strobe (Desert Trophy Mode)
This Killer Kontroller is compatible with any 2, 3, 4+ channel radio. With a 2 channel radio you will only get brake and turn signal functions, with the headlights on constantly. With a 3+ channel radio you can choose from the 11 different light modes. The Killer Kontroller can power two different channels of headlights and a pair of tail/brake lights. When you apply the brakes on your transmitter your tail lights will light up and become brake lights. You can also make your tail lights function as turn signals. As you steer the car the tail lights will flash which ever direction you are turning. This feature can be disabled. The Killer Kontroller also has an always-on marker light output, which can be used for UnderGlow lights or whatever you want. Connect a Super Bee to the Aux output on the light controller, and then you can kill the engine by turning off the transmitter power. With 4 channel radios the setup is a little different, so be sure to watch the light controller videos on our video page. Another cool feature we have added is that the headlights will automatically start flashing when your battery voltage gets low (4.0v), alerting you that you need to recharge the battery pack. This light controller operates on 4 to 12 volts, but whatever voltage your battery is, that is what the light controller will put out to your LED lights. Six volts is the usual application. If your Servos are 6v then you need to use a 6v battery. This light controller is compact in size, doesn't get hot, and can be used on many gas, nitro, and electric RCs. The Killer Kontroller v3™ light controller works best with Killer RC brand LED lights.